RSI Street Series Injector Set for Dodge Viper Gen 3 (2003-2006) are available as 60lb/h or 80lb/h High Impedance OEM Size. 

Set of 10 Injectors - Drop In Replacement for the Gen 3 Viper

Ultra-Compact, high flow injector at just 38mm seat to seat!  These injectors are sized for most forced induction applications up to 1000RWHP.  Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with the stock Viper ECU.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

Features:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Specifications:

80LB/H Injectors -

Injector Advertised Flow Rate (lbs/hr) 80lb/hr @ 39.15psi - 84lbs./hr. @ 43.5
Injector Advertised Flow Rate (cc/min) 875 cc/min
Injector Impedance 11-18 ohms - High Impedence

60LB/H Injectors -

Injector Advertised Flow Rate (lbs/hr) 62.7 lbs./hr. @ 43.5
Injector Advertised Flow Rate (cc/min) 646 cc/min
Injector Impedance 11-18 ohms - High Impedence

Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: Bosch EV1
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Factory fitted with Viton upper and lower o-rings
48mm end to end - 38mm seat to seat